Price: ₹5,788.17
(as of Jul 13,2024 20:26:00 UTC – Details)
6 of Melt-blown Four Layers Filtration Polypropylene Sediment Filters – Sediment filter is often the first filter installed in the Reverse Osmosis circuit. Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. The main function of a sediment filter is to remove large and fine particles from a drinking water, such as sand, dirt, silt, and rust particles. Removal of such particles allows for a better performance of all the following filters, such as Carbon Block or GAC filters.
Micron rating: 5 Microns.
Dimensions: 10″ x 2.5″
Lifetime: Replace two or three times a year, depending on the water quality.
Those filters are individually wrapped and sealed and meet NSF Standards and Regulations.
Filter will fit any filters with 10” filter housing and Residential Reverse Osmosis Unit that features standard 10” filter housing.
💎 Industry Standard 10-inch 10 Micron Sediment Filter – Used for effectively removing most sediments, cysts, chlorine, and fluorides
💎 This is a filter for a standard Reverse Osmosis Water Filtration Unit or any type of Water Filtration Unit with a 10 inch housing and WELL-MATCHED Models of Cartridges: Dupont PFC5002,DuPont WFPFC5002, Pentek DGD Series, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14, RS14-SD, RS14-DS and RS14-SS, GE FXUSC, Aquaboon 25S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05
💎 Product Lifetime: Replace two or three times a year – depending on your water quality
💎 This filter is wrapped and sealed and meets NSF (National Science Foundation) Standards and Regulations. Dimensions: 10 inches x 2.5 inches (24.4 cm x 6.35 cm)
💎 WELL-FIT FOLLOWING HOUSINGS AND REVERS OSMOSIS WATER FILTER SYSTEMS: DuPont WFPF38001C, WFPF13003B, Pentek 158643 3/8, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2; iSpring RCC7AK, Global Water RO-505, RO5DX, APEC ROES-50-A, SimPure RPWROKSN075HDB
Judy Cornett –
I order these for our in-line water filter and they work very well. We have horrible sulfur water that stains my sinks, tubs and clothing over time even with every day cleaning. These filters help cut down on that a lot and also makes the water clearer and not smell like rotten eggs.. which is definitely a plus.
Calvin –
These are quality units that work as advertised and certainly do allow an R/O system thrive. I would honestly recommend doing 3 in a row though depending on your setup. 2 in a stack for me running 24/7 only lasts 3 months with 550 ppm Michigan well water. If your water is city water or municipal water then probably you won’t have to change filters for months but if you’re someone like me fighting well water then you will need to consider a pre-filter before the 2 or just buy their bulk and change out your filters every couple months.
Brett Grigson –
Exactly what I was hoping for.
Jered Van –
I bought this for my Mistor pump. They work well
Gary L. –
I use these in our whole house well water line. Great for filtering out impurities in the water line leaving no after taste or reduced water pressure. If you notice reduced water pressure, change the filter as it may have caught more impure sediment was water table changes. Great for filtering city water too. I will continue to purchase as long as I get a good price. The water you drink is important to your health!